Mercedes CLA 250 Turbo Upgrade by TurboKits.com
**FREE BOV Spacer or $79 OFF - Ends 12/31/24
TAGS: Mercedes-Benz CLA 250 Turbo Upgrade, 2014, 2015, 2016, 2017, 2018, 2019, CLA 250, GLA 250, A250, QX30, 2.0T, Turbocharger Upgrade
Price Match Guarantee
Found it for less but value our service?
Details
Mercedes CLA 250 Turbo Upgrade for 2014-2019 Mercedes-Benz CLA 250 2.0T, A 250, GLA 250, Infiniti QX30 by TurboKits.com
TurboKits.com is pleased to release our CLA 250 (C117) Turbo Upgrade. Constructed of billet aluminum, our 47mm/60mm compressor wheel is 5-axis CNC machined and flows an impressive 36+ lbs./min. With WHP and WTQ gains both in the 80-100 range, the power band continues beyond 4500 RPM where gains in excess of 125 WHP and WTQ are achieved. This turbo spools like stock, creates great power, and pulls all the way to redline! Close attention to our turbo wheel dimensions offers a margin of safety for your motor/transmission.
The CLA250 is a great daily driver, however, it lacks in the power department. Even with a Stage 2 package the factory turbocharger is "tapped" out. After extensive R&D, TurboKits.com has achieved the “impossible”- a turbocharger upgrade that will give the CLA250 a stronger power band without sacrificing low-end power. You can’t find that elsewhere!
After collaborating with AMR on this fun project, we’ve developed a software upgrade to complete this package and give your vehicle the "worry free" power increase you've been looking for.
*Not running a turbo specific tune with our turbo upgrade can lead to premature turbo failure or worse, catastophic engine failure. DO NOT run this turbo without a turbo specific tune.
Because we start with a factory CLA 250 Turbocharger, there are no custom oil or water lines to leak, no special couplers or gaskets to track down, and our Front Mount Intercooler Upgrade and High Flow CAT Pipe bolt right on! The install process is just like the factory ordered.
Key Features:
5 Axis CNC Upgraded Compressor Wheel for More Flow
Upgraded 9 Blade Turbine Wheel for More Flow
Ported Exhaust Manifold for More Flow
Ported Exhaust Housing for More Flow
Upgraded Wastegate Actuator
Rebuilt and Balanced for Smooth Operation
100% Bolt on installation
+80-100 Wheel HP / +80-100 Lb Ft of Wheel Torque
Supported Platforms:
2014-2019 CLA 250 FWD & 4Matic (C117, M270)
2014-2020 GLA 250 FWD & 4Matic (X156, M270)
2013-2018 A250 (W176, M270)
2015+ Infiniti QX30
Turbo Specific Tune Required. Select the AMR ECU Flash Option for a plug n play expierence *If you select either of the actuator upgrades and do not use our tune. We cannot be responsible for turbo failure and damage caused by shaft overspeeding. Adjusting the boost control duty cycles to maintain a safe shaft speed and boost level is the responsibility of the tuner!!
*** These gains were done on 93 octane.
*** Available for 91 octane as well.
"Just to give you an update on your upgraded turbo. I’ve tuned lots of CLA before but to be honest, yours turbo is very powerful. It’s give 334bhp on final tune at 22psi and running on E20 fuel." Karand M. - BMS tuning, located in Thaliand, Singapore, Malaysia - Great #s and a solid 110HP before and after gains. Nice work Karand!
The price listed does not include a core charge. You have 2 options: 1) Select the core charge in the options menu, the TurboKits.com Turbo Upgrade will ship and a RGA# and shipping instructions will be sent to you for your core turbo return. Once received, the core is inspected and your account will be credited upon core approval. Or: 2) Do not select the core charge when you place the order. We will send you a RGA# and shipping instructions for your core to be sent in, it will be inspected and upon approval, will get the TurboKits.com treatment, then shipped back to you. There is no core refund with option 2, as no core charge was collected. If you chose option 1, REMEMBER to add the core charge in the options menu for fastest processing.
More Information
| Brand | TurboKits.com |
|---|---|
| Type of Part | Turbo Upgrades |
| Engine Fitment | 2.0T GDi |
| Length | 24 |
| Width | 12 |
| Height | 12 |
| Weight | 35.000000 |
Reviews
Top customer reviews
Response from TurboKits.com
Response from TurboKits.com
Response from TurboKits.com
Fitment
Mercedes CLA 250 Turbo Upgrade for 2014-2019 Mercedes-Benz CLA 250 2.0T, A 250, GLA 250, Infiniti QX30 by TurboKits.com
TurboKits.com is pleased to release our CLA 250 (C117) Turbo Upgrade. Constructed of billet aluminum, our 47mm/60mm compressor wheel is 5-axis CNC machined and flows an impressive 36+ lbs./min. With WHP and WTQ gains both in the 80-100 range, the power band continues beyond 4500 RPM where gains in excess of 125 WHP and WTQ are achieved. This turbo spools like stock, creates great power, and pulls all the way to redline! Close attention to our turbo wheel dimensions offers a margin of safety for your motor/transmission.
The CLA250 is a great daily driver, however, it lacks in the power department. Even with a Stage 2 package the factory turbocharger is "tapped" out. After extensive R&D, TurboKits.com has achieved the “impossible”- a turbocharger upgrade that will give the CLA250 a stronger power band without sacrificing low-end power. You can’t find that elsewhere!
After collaborating with AMR on this fun project, we’ve developed a software upgrade to complete this package and give your vehicle the "worry free" power increase you've been looking for.
*Not running a turbo specific tune with our turbo upgrade can lead to premature turbo failure or worse, catastophic engine failure. DO NOT run this turbo without a turbo specific tune.
Because we start with a factory CLA 250 Turbocharger, there are no custom oil or water lines to leak, no special couplers or gaskets to track down, and our Front Mount Intercooler Upgrade and High Flow CAT Pipe bolt right on! The install process is just like the factory ordered.
Key Features:
5 Axis CNC Upgraded Compressor Wheel for More Flow
Upgraded 9 Blade Turbine Wheel for More Flow
Ported Exhaust Manifold for More Flow
Ported Exhaust Housing for More Flow
Upgraded Wastegate Actuator
Rebuilt and Balanced for Smooth Operation
100% Bolt on installation
+80-100 Wheel HP / +80-100 Lb Ft of Wheel Torque
Supported Platforms:
2014-2019 CLA 250 FWD & 4Matic (C117, M270)
2014-2020 GLA 250 FWD & 4Matic (X156, M270)
2013-2018 A250 (W176, M270)
2015+ Infiniti QX30
Turbo Specific Tune Required. Select the AMR ECU Flash Option for a plug n play expierence *If you select either of the actuator upgrades and do not use our tune. We cannot be responsible for turbo failure and damage caused by shaft overspeeding. Adjusting the boost control duty cycles to maintain a safe shaft speed and boost level is the responsibility of the tuner!!
*** These gains were done on 93 octane.
*** Available for 91 octane as well.
"Just to give you an update on your upgraded turbo. I’ve tuned lots of CLA before but to be honest, yours turbo is very powerful. It’s give 334bhp on final tune at 22psi and running on E20 fuel." Karand M. - BMS tuning, located in Thaliand, Singapore, Malaysia - Great #s and a solid 110HP before and after gains. Nice work Karand!
The price listed does not include a core charge. You have 2 options: 1) Select the core charge in the options menu, the TurboKits.com Turbo Upgrade will ship and a RGA# and shipping instructions will be sent to you for your core turbo return. Once received, the core is inspected and your account will be credited upon core approval. Or: 2) Do not select the core charge when you place the order. We will send you a RGA# and shipping instructions for your core to be sent in, it will be inspected and upon approval, will get the TurboKits.com treatment, then shipped back to you. There is no core refund with option 2, as no core charge was collected. If you chose option 1, REMEMBER to add the core charge in the options menu for fastest processing.
