Details
2022, 2023, 2024, 2025 and Up, Toyota Tundra 3.4TT, Turbo, Cold Air Intakes, CAI, Intake System, Stillen, TruPower - TP403210, TP403211
Features and Benefits:
-
Not for sale in California
- Addition of a secondary fresh air source from the front of the vehicle.
- Achieves lower intake air temperature than other intakes. (12 times faster than OEM)
- +11 Horsepower increase*
- +22 Torque increase*
- No cutting/modifications required
- High quality STILLEN washable oiled filter
- Serviceable air filter with limited lifetime warranty
- Made in USA.
*Results May Vary!
STILLEN is thrilled to offer the only true cold air intake for the 2022-2025 Toyota Tundra 3.4 liter. After nearly 2 years of development and testing, STILLEN has engineered a cold-air intake that enhances engine airflow and significantly lowers air intake temperatures.
The Trupower by STILLEN cold air intake includes two replacement intake scoops and intake ducts, channeling truly fresh cold air from the front of the vehicle through the truck's core support into a larger airbox. This design maximizes the factory air intake opening as well as our secondary air source, providing nearly 50% more airflow through the true cold air intake port.
During testing, the STILLEN product development team observed that intake air temperatures dropped faster than with the factory air intake. Competing intakes not only ran hotter than the factory intake but also failed to reach ambient temperatures. When comparing our TruPower intake to the factory air intake at a cruising speed on the highway (65-70 mph), we saw ambient air temperature within a 1/4 mile (20 seconds), whereas the factory intake took nearly 12 times as long, 3 miles and about 3 minutes, and it was still 3-5 degrees warmer than ambient. After 10 minutes of consistent cruising, we still never saw the factory intake reach ambient temperature. It was only when we stepped on it, gave it a hard acceleration, that we saw the OEM intake achieve an actual ambient air temperature. As soon as we let off the gas, the temperature in the intakes already started to climb back to 3-5 degrees above ambient. This testing proves that the TruPower cold air intake is the best intake on the market for a Toyota Tundra. In our opinion, this should be one of the first modifications for a Tundra if you own one.
Alongside the substantial reduction in intake air temperature, the Trupower by STILLEN Toyota Tundra cold air intake boosts horsepower and torque by over +10HP and 20 lb ft at peaks*, with further gains across the RPM range. .
*Results May Vary!
This air intake is available with two options for STILLEN air filters, either oiled or dry. For customers facing extreme dust environments, we suggest our Dry Filters. For those running more city or high humidity climates, we suggest the Oiled Filters. If you have any questions or need recommendations, contact our sales team today!
More Information
| Part Number | TP403210, TP403211 |
|---|---|
| Brand | STILLEN |
| Type of Part | Intakes |
| Engine Fitment | 3.4L |
| Length | 24 |
| Width | 16 |
| Height | 13 |
| Weight | 14.000000 |
Reviews
Fitment
2022, 2023, 2024, 2025 and Up, Toyota Tundra 3.4TT, Turbo, Cold Air Intakes, CAI, Intake System, Stillen, TruPower - TP403210, TP403211
Features and Benefits:
-
Not for sale in California
- Addition of a secondary fresh air source from the front of the vehicle.
- Achieves lower intake air temperature than other intakes. (12 times faster than OEM)
- +11 Horsepower increase*
- +22 Torque increase*
- No cutting/modifications required
- High quality STILLEN washable oiled filter
- Serviceable air filter with limited lifetime warranty
- Made in USA.
*Results May Vary!
STILLEN is thrilled to offer the only true cold air intake for the 2022-2025 Toyota Tundra 3.4 liter. After nearly 2 years of development and testing, STILLEN has engineered a cold-air intake that enhances engine airflow and significantly lowers air intake temperatures.
The Trupower by STILLEN cold air intake includes two replacement intake scoops and intake ducts, channeling truly fresh cold air from the front of the vehicle through the truck's core support into a larger airbox. This design maximizes the factory air intake opening as well as our secondary air source, providing nearly 50% more airflow through the true cold air intake port.
During testing, the STILLEN product development team observed that intake air temperatures dropped faster than with the factory air intake. Competing intakes not only ran hotter than the factory intake but also failed to reach ambient temperatures. When comparing our TruPower intake to the factory air intake at a cruising speed on the highway (65-70 mph), we saw ambient air temperature within a 1/4 mile (20 seconds), whereas the factory intake took nearly 12 times as long, 3 miles and about 3 minutes, and it was still 3-5 degrees warmer than ambient. After 10 minutes of consistent cruising, we still never saw the factory intake reach ambient temperature. It was only when we stepped on it, gave it a hard acceleration, that we saw the OEM intake achieve an actual ambient air temperature. As soon as we let off the gas, the temperature in the intakes already started to climb back to 3-5 degrees above ambient. This testing proves that the TruPower cold air intake is the best intake on the market for a Toyota Tundra. In our opinion, this should be one of the first modifications for a Tundra if you own one.
Alongside the substantial reduction in intake air temperature, the Trupower by STILLEN Toyota Tundra cold air intake boosts horsepower and torque by over +10HP and 20 lb ft at peaks*, with further gains across the RPM range. .
*Results May Vary!
This air intake is available with two options for STILLEN air filters, either oiled or dry. For customers facing extreme dust environments, we suggest our Dry Filters. For those running more city or high humidity climates, we suggest the Oiled Filters. If you have any questions or need recommendations, contact our sales team today!
