2021+ BMW M3 M4 S58 G80 G82 Bolt On Twin Turbo Upgrade
Price Match Guarantee
Found it for less but value our service?
Details
2021+ BMW M3 M4 S58 G80 G82 Bolt On Twin Turbo Upgrade
SURPRISING POWER IN AN OEM+ PACKAGE
Full-Race spoke with, and listened to, BMW tuners, racers, and owners. It turned out what they wanted was OEM reliability, a simple install and more top-end HP (with zero core charges). Proven in DTM endurance racing and manufactured using 100% OEM components from Mitsubishi Turbocharger, BMW's turbo manufacturer, these are some of the finest OEM+ bolt-on turbo upgrades to come through Full Race since their inception in 2003.
Full-Race BMW S58s twin turbos are purpose-built, stock-appearing, and stock-location performance upgrade turbochargers. Nobody can visually tell these are not OEM without measuring upon disassembly. Utilizing a larger Mar-M turbine wheel with a billet compressor wheel, this turbo is designed for reliable midrange and top-end gains.
Manufactured with validated components from MHI (the OEM supplier to BMW) these turbos are proven during multiple 24H endurance races. Each turbo is hand-built and high speed balanced for maximum reliability and durability. Wastegate actuators are pre-calibrated for easy installation. Stock tunes can be utilized with all stock components. A custom tune is recommended for maximum performance.
FEATURES
- Performance-optimized Billet compressor wheel with latest generation blade aero
- A direct bolt-on replacement; all connections to the vehicle utilize OE inlet and outlet to retain factory intake plumbing and exhaust routing.
- Manufactured with 100% brand-new OEM components—not remanufactured and no core charge
- Ready to install out of the box, with pre-set electronic wastegate
- Step-Gap oil seal on Turbine side
- Multipad Thrust Bearing Assembly
- Watercooled Center Section
COMPRESSOR MAP
INCREASED FLOW = MORE POWER
MHI S58 UPGRADE COMPRESSOR MAP: 78LB/MIN MAX FLOW RATE
COMPRESSOR WHEEL SIZE:
OEM: 56mm
MHI: 58mm
TURBINE WHEEL SIZE:
OEM: 47mm
MHI: 54mm
S58 OEM Compressor & Turbine Maps (Black) vs MHI S58 Upgrade Map (Red)
Notice for California Residents: This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution-controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use may be a violation of local, state, and federal laws. It is the buyer's responsibility to verify the legal use of this product for the intended application and use
More Information
| Part Number | MT389-09100-09110 |
|---|---|
| Brand | Mitsubishi |
| Type of Part | Turbo Upgrades |
| Engine Fitment | 3.0L |
| Length | 24 |
| Width | 12 |
| Height | 12 |
| Weight | 45.000000 |
Reviews
Fitment
2021+ BMW M3 M4 S58 G80 G82 Bolt On Twin Turbo Upgrade
SURPRISING POWER IN AN OEM+ PACKAGE
Full-Race spoke with, and listened to, BMW tuners, racers, and owners. It turned out what they wanted was OEM reliability, a simple install and more top-end HP (with zero core charges). Proven in DTM endurance racing and manufactured using 100% OEM components from Mitsubishi Turbocharger, BMW's turbo manufacturer, these are some of the finest OEM+ bolt-on turbo upgrades to come through Full Race since their inception in 2003.
Full-Race BMW S58s twin turbos are purpose-built, stock-appearing, and stock-location performance upgrade turbochargers. Nobody can visually tell these are not OEM without measuring upon disassembly. Utilizing a larger Mar-M turbine wheel with a billet compressor wheel, this turbo is designed for reliable midrange and top-end gains.
Manufactured with validated components from MHI (the OEM supplier to BMW) these turbos are proven during multiple 24H endurance races. Each turbo is hand-built and high speed balanced for maximum reliability and durability. Wastegate actuators are pre-calibrated for easy installation. Stock tunes can be utilized with all stock components. A custom tune is recommended for maximum performance.
FEATURES
- Performance-optimized Billet compressor wheel with latest generation blade aero
- A direct bolt-on replacement; all connections to the vehicle utilize OE inlet and outlet to retain factory intake plumbing and exhaust routing.
- Manufactured with 100% brand-new OEM components—not remanufactured and no core charge
- Ready to install out of the box, with pre-set electronic wastegate
- Step-Gap oil seal on Turbine side
- Multipad Thrust Bearing Assembly
- Watercooled Center Section
COMPRESSOR MAP
INCREASED FLOW = MORE POWER
MHI S58 UPGRADE COMPRESSOR MAP: 78LB/MIN MAX FLOW RATE
COMPRESSOR WHEEL SIZE:
OEM: 56mm
MHI: 58mm
TURBINE WHEEL SIZE:
OEM: 47mm
MHI: 54mm
S58 OEM Compressor & Turbine Maps (Black) vs MHI S58 Upgrade Map (Red)
Notice for California Residents: This product does not have a CARB EO #; it is not legal for sale or use in CA on pollution-controlled motor vehicles. This is intended as a "Race Only" product to be used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization; any other use including recreational off-road use may be a violation of local, state, and federal laws. It is the buyer's responsibility to verify the legal use of this product for the intended application and use
